Investigation of the Mechanical Strength of Cell-plastics Fabricated Using Unicellular Green Algal Cells and Varying Weight Ratios of Biodegradable Polybutylene Succinate

Akihito Nakanishi; Kohei Iritani; Yuri Sakihama; Marina Watanabe

doi:doi:10.11648/j.ijmb.20200504.11

| Peer-Reviewed

Investigation of the Mechanical Strength of Cell-plastics Fabricated Using Unicellular Green Algal Cells and Varying Weight Ratios of Biodegradable Polybutylene Succinate

Akihito Nakanishi, Kohei Iritani, Yuri Sakihama, Marina Watanabe

Published in International Journal of Microbiology and Biotechnology (Volume 5, Issue 4)

Received: 14 October 2020 Accepted: 23 October 2020 Published: 11 November 2020

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Petroleum-derived plastics are currently indispensable; however, they are non-recyclable and exhaustible. Despite global progress in the research and development for biodegradable green plastics using recyclable resources, green plastics are unable to replace petroleum-derived plastics so far because of the costs involved in the extraction and purification processes. Due to the increasing demand for the development of innovative green plastics, cell-plastic composed of the green alga Chlamydomonas reinhardtii as an ingredient and biodegradable compounds as fillers was proposed as a novel green plastic. For a carbon-recycling system in the future, C. reinhardtii is advantageous due to higher growth activity using CO₂ gas in atmosphere compared to other terrestrial plants. In addition, the rigidity of its cell wall would prevent the reduction of a mechanical strength of the cell-plastics. Green plastics made of organic polymers are expensive because of high producing cost. On the other hand, the plastics made of green algae, instead of organic polymers, would be expected reducing the price. Thus, the purpose of this study was to clarify whether the cell-plastics produced by substituting organic polymers with algal cells could perform mechanical and physical properties similar to existing plastics products. As a filler for cell-plastics, biodegradable polybutylene succinate (PBS), which form a self-standing film, was chosen in this study. PBS cell-plastics were examined for their following mechanical and physical properties: Young's modulus, tensile strength, thermal analysis, and surface hydrophilicity. PBS cell-plastic (1:1) composed of 50% PBS (w/w) exhibited the potential to replace petroleum-derived plastics such as low-density polyethylene and polyvinyl chloride. This study introduces the practical possibility of PBS cell-plastics as green plastics.

Published in	International Journal of Microbiology and Biotechnology (Volume 5, Issue 4)
DOI	10.11648/j.ijmb.20200504.11
Page(s)	159-164
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2020. Published by Science Publishing Group

Keywords

Cell-plastics, Green Alga, Chlamydomonas reinhardtii, Polybutylene Succinate (PBS), Biodegradable

References

[1]	Geyer R, Jambeck JR, Law KL (2017) Production, use, and fate of all plastics ever made. Sci. Adv. 3: e1700782.
[2]	Shahbaz M, Nasreen S, Ling CH, Sbia R (2014) Causality between trade openness and energy consumption: what causes what in high, middle and low income countries. Energy Policy 70: 126–143.
[3]	Yao X, Yasmeen R, Padda IUH, Shah WUH, Kamal MA (2020) Inequalities by energy sources: an assessment of environmental quality. PLoS One 15: e0230503.
[4]	Villanueva BR, Salvador MB, Huelgas RG (2019) Change climate and health. Rev. Clín. Esp. 219: 260–265.
[5]	Barnes DKA, Galgani F, Thompson RC, Barlaz M (2009) Accumulation and fragmentation of plastic debris in global environments. Phil. Trans. R. Soc. B 364: 1985–1998.
[6]	Liu L, Fishman ML, Hicks KB, Liu CK (2005) Biodegradable composites from sugar beet pulp and poly (lactic acid). J. Agr. Food Ch. 53: 9017–9022.
[7]	Sonseca A, Madani S, Rodríguez G, Hevilla V, Echeverría C, Fernández-García M, Muñoz-Bonilla A, Charef N, López D (2020) Multifunctional PLA blends containing chitosan mediated silver nanoparticles: Thermal, mechanical, antibacterial, and degradation properties. Nanomaterials 10: 22.
[8]	Ammala A, Bateman S, Dean K, Petinakis E, Sangwan P, Wong S, Yuan Q, Yu L, Patrick C, Leong KH (2011) An overview of degradable and biodegradable polyolefins. Prog. Pol. Sci. 36: 1015–1049.
[9]	Iles A, Martin AN (2013) Expanding bioplastics production: sustainable business innovation in the chemical industry. J. Cleaner Prod. 45: 38–49.
[10]	Nakanishi A, Iritani K, Sakihama Y, Ozawa N, Mochizuki A, Watanabe M (2020) Construction of cell-plastics as neo-plastics consisted of cell-layer provided green alga Chlamydomonas reinhardtii covered by two-dimensional polymer. AMB Expr. 10: 112.
[11]	Hang LT, Mori K, Tanaka Y, Morikawa M, Toyama T (2020) Enhanced lipid productivity of Chlamydomonas reinhardtii with combination of NaCl and CaCl₂ stresses. Bioproc. Biosyst. Eng. 43: 971–980.
[12]	Sun H, Mao X, Wu T, Ren Y, Chen F, Liu B (2018) Novel insight of carotenoid and lipid biosynthesis and their roles in storage carbon metabolism in Chlamydomonas reinhardtii. Bioresour. Technol. 263: 450–457.
[13]	Wang B, Li Y, Wu N, Lan CQ (2008) CO₂ bio-mitigation using microalgae. Appl. Microbiol. Biotechnol. 79: 707–718.
[14]	Hwang HJ, Kim YT, Kang NS, Han JW (2018) A simple method for removal of the Chlamydomonas reinhardtii cell wall using a commercially available subtilisin (alcalase). J. Mol. Microbiol. Biotechnol. 28: 169–178.
[15]	Nazrin A, Sapuan SM, Zuhri MYM, Ilyas RA, Syafiq R, Sherwani SFK (2020) Nanocellulose reinforced thermoplastic starch (TPS), polylactic acid (PLA), and polybutylene succinate (PBS) for food packaging applications. Front Chem. 8: 213.
[16]	Zhang Y, Zhou S, Fang X, Zhou X, Wang J, Bai F, Peng S (2019) Renewable and flexible UV-blocking film from poly (butylene succinate) and lignin. Eur. Polym. J. 116: 265–274.
[17]	Shih YF, Wang TY, Jeng RJ, Wu JY, Teng CC (2007) Biodegradable nanocomposites based on poly (butylene succinate)/organoclay. J. Polym. Environ. 15: 151–158.
[18]	Ho SH, Nakanishi A, Kato Y, Yamasaki H, Chang JS, Misawa N, Hirose Y, Minagawa J, Hasunuma T, Kondo A (2017) Dynamic metabolic profiling together with transcription analysis reveals salinity-induced starch-to-lipid biosynthesis in alga Chlamydomonas sp. JSC4. Sci. Rep. 7: 45471.
[19]	Nakanishi A, Aikawa S, Ho SH, Chen CY, Chang JS, Hasunuma T, Kondo A (2014) Development of lipid productivities under different CO₂ conditions of marine microalgae Chlamydomonas sp. JSC4. Bioresour. Technol. 152: 247–252.
[20]	Brandrup J, Immergut EH, Grulke EA (1999) Polymer handbook, 4th edn. Wiley, New York, Chichester, Weinheim, Brisbane, Singapore, Toronto, pp V162–V165.

Cite This Article

Plain Text BibTeX RIS

APA Style

Akihito Nakanishi, Kohei Iritani, Yuri Sakihama, Marina Watanabe. (2020). Investigation of the Mechanical Strength of Cell-plastics Fabricated Using Unicellular Green Algal Cells and Varying Weight Ratios of Biodegradable Polybutylene Succinate. International Journal of Microbiology and Biotechnology, 5(4), 159-164. https://doi.org/10.11648/j.ijmb.20200504.11

Copy | Download

ACS Style

Akihito Nakanishi; Kohei Iritani; Yuri Sakihama; Marina Watanabe. Investigation of the Mechanical Strength of Cell-plastics Fabricated Using Unicellular Green Algal Cells and Varying Weight Ratios of Biodegradable Polybutylene Succinate. Int. J. Microbiol. Biotechnol. 2020, 5(4), 159-164. doi: 10.11648/j.ijmb.20200504.11

Copy | Download

AMA Style

Akihito Nakanishi, Kohei Iritani, Yuri Sakihama, Marina Watanabe. Investigation of the Mechanical Strength of Cell-plastics Fabricated Using Unicellular Green Algal Cells and Varying Weight Ratios of Biodegradable Polybutylene Succinate. Int J Microbiol Biotechnol. 2020;5(4):159-164. doi: 10.11648/j.ijmb.20200504.11

Copy | Download

@article{10.11648/j.ijmb.20200504.11,
  author = {Akihito Nakanishi and Kohei Iritani and Yuri Sakihama and Marina Watanabe},
  title = {Investigation of the Mechanical Strength of Cell-plastics Fabricated Using Unicellular Green Algal Cells and Varying Weight Ratios of Biodegradable Polybutylene Succinate},
  journal = {International Journal of Microbiology and Biotechnology},
  volume = {5},
  number = {4},
  pages = {159-164},
  doi = {10.11648/j.ijmb.20200504.11},
  url = {https://doi.org/10.11648/j.ijmb.20200504.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmb.20200504.11},
  abstract = {Petroleum-derived plastics are currently indispensable; however, they are non-recyclable and exhaustible. Despite global progress in the research and development for biodegradable green plastics using recyclable resources, green plastics are unable to replace petroleum-derived plastics so far because of the costs involved in the extraction and purification processes. Due to the increasing demand for the development of innovative green plastics, cell-plastic composed of the green alga Chlamydomonas reinhardtii as an ingredient and biodegradable compounds as fillers was proposed as a novel green plastic. For a carbon-recycling system in the future, C. reinhardtii is advantageous due to higher growth activity using CO2 gas in atmosphere compared to other terrestrial plants. In addition, the rigidity of its cell wall would prevent the reduction of a mechanical strength of the cell-plastics. Green plastics made of organic polymers are expensive because of high producing cost. On the other hand, the plastics made of green algae, instead of organic polymers, would be expected reducing the price. Thus, the purpose of this study was to clarify whether the cell-plastics produced by substituting organic polymers with algal cells could perform mechanical and physical properties similar to existing plastics products. As a filler for cell-plastics, biodegradable polybutylene succinate (PBS), which form a self-standing film, was chosen in this study. PBS cell-plastics were examined for their following mechanical and physical properties: Young's modulus, tensile strength, thermal analysis, and surface hydrophilicity. PBS cell-plastic (1:1) composed of 50% PBS (w/w) exhibited the potential to replace petroleum-derived plastics such as low-density polyethylene and polyvinyl chloride. This study introduces the practical possibility of PBS cell-plastics as green plastics.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Investigation of the Mechanical Strength of Cell-plastics Fabricated Using Unicellular Green Algal Cells and Varying Weight Ratios of Biodegradable Polybutylene Succinate
AU  - Akihito Nakanishi
AU  - Kohei Iritani
AU  - Yuri Sakihama
AU  - Marina Watanabe
Y1  - 2020/11/11
PY  - 2020
N1  - https://doi.org/10.11648/j.ijmb.20200504.11
DO  - 10.11648/j.ijmb.20200504.11
T2  - International Journal of Microbiology and Biotechnology
JF  - International Journal of Microbiology and Biotechnology
JO  - International Journal of Microbiology and Biotechnology
SP  - 159
EP  - 164
PB  - Science Publishing Group
SN  - 2578-9686
UR  - https://doi.org/10.11648/j.ijmb.20200504.11
AB  - Petroleum-derived plastics are currently indispensable; however, they are non-recyclable and exhaustible. Despite global progress in the research and development for biodegradable green plastics using recyclable resources, green plastics are unable to replace petroleum-derived plastics so far because of the costs involved in the extraction and purification processes. Due to the increasing demand for the development of innovative green plastics, cell-plastic composed of the green alga Chlamydomonas reinhardtii as an ingredient and biodegradable compounds as fillers was proposed as a novel green plastic. For a carbon-recycling system in the future, C. reinhardtii is advantageous due to higher growth activity using CO2 gas in atmosphere compared to other terrestrial plants. In addition, the rigidity of its cell wall would prevent the reduction of a mechanical strength of the cell-plastics. Green plastics made of organic polymers are expensive because of high producing cost. On the other hand, the plastics made of green algae, instead of organic polymers, would be expected reducing the price. Thus, the purpose of this study was to clarify whether the cell-plastics produced by substituting organic polymers with algal cells could perform mechanical and physical properties similar to existing plastics products. As a filler for cell-plastics, biodegradable polybutylene succinate (PBS), which form a self-standing film, was chosen in this study. PBS cell-plastics were examined for their following mechanical and physical properties: Young's modulus, tensile strength, thermal analysis, and surface hydrophilicity. PBS cell-plastic (1:1) composed of 50% PBS (w/w) exhibited the potential to replace petroleum-derived plastics such as low-density polyethylene and polyvinyl chloride. This study introduces the practical possibility of PBS cell-plastics as green plastics.
VL  - 5
IS  - 4
ER  -

Copy | Download

Author Information

Akihito Nakanishi

Graduate School of Bionics, Tokyo University of Technology, Tokyo, Japan
Kohei Iritani

School of Engineering, Tokyo University of Technology, Tokyo, Japan
Yuri Sakihama

Tokyo University of Technology, Tokyo, Japan
Marina Watanabe

School of Bioscience and Biotechnology, Tokyo University of Technology, Tokyo, Japan

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Akihito Nakanishi, Kohei Iritani, Yuri Sakihama, Marina Watanabe. (2020). Investigation of the Mechanical Strength of Cell-plastics Fabricated Using Unicellular Green Algal Cells and Varying Weight Ratios of Biodegradable Polybutylene Succinate. International Journal of Microbiology and Biotechnology, 5(4), 159-164. https://doi.org/10.11648/j.ijmb.20200504.11

Copy | Download

ACS Style

Akihito Nakanishi; Kohei Iritani; Yuri Sakihama; Marina Watanabe. Investigation of the Mechanical Strength of Cell-plastics Fabricated Using Unicellular Green Algal Cells and Varying Weight Ratios of Biodegradable Polybutylene Succinate. Int. J. Microbiol. Biotechnol. 2020, 5(4), 159-164. doi: 10.11648/j.ijmb.20200504.11

Copy | Download

AMA Style

Akihito Nakanishi, Kohei Iritani, Yuri Sakihama, Marina Watanabe. Investigation of the Mechanical Strength of Cell-plastics Fabricated Using Unicellular Green Algal Cells and Varying Weight Ratios of Biodegradable Polybutylene Succinate. Int J Microbiol Biotechnol. 2020;5(4):159-164. doi: 10.11648/j.ijmb.20200504.11

Copy | Download

@article{10.11648/j.ijmb.20200504.11,
  author = {Akihito Nakanishi and Kohei Iritani and Yuri Sakihama and Marina Watanabe},
  title = {Investigation of the Mechanical Strength of Cell-plastics Fabricated Using Unicellular Green Algal Cells and Varying Weight Ratios of Biodegradable Polybutylene Succinate},
  journal = {International Journal of Microbiology and Biotechnology},
  volume = {5},
  number = {4},
  pages = {159-164},
  doi = {10.11648/j.ijmb.20200504.11},
  url = {https://doi.org/10.11648/j.ijmb.20200504.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmb.20200504.11},
  abstract = {Petroleum-derived plastics are currently indispensable; however, they are non-recyclable and exhaustible. Despite global progress in the research and development for biodegradable green plastics using recyclable resources, green plastics are unable to replace petroleum-derived plastics so far because of the costs involved in the extraction and purification processes. Due to the increasing demand for the development of innovative green plastics, cell-plastic composed of the green alga Chlamydomonas reinhardtii as an ingredient and biodegradable compounds as fillers was proposed as a novel green plastic. For a carbon-recycling system in the future, C. reinhardtii is advantageous due to higher growth activity using CO2 gas in atmosphere compared to other terrestrial plants. In addition, the rigidity of its cell wall would prevent the reduction of a mechanical strength of the cell-plastics. Green plastics made of organic polymers are expensive because of high producing cost. On the other hand, the plastics made of green algae, instead of organic polymers, would be expected reducing the price. Thus, the purpose of this study was to clarify whether the cell-plastics produced by substituting organic polymers with algal cells could perform mechanical and physical properties similar to existing plastics products. As a filler for cell-plastics, biodegradable polybutylene succinate (PBS), which form a self-standing film, was chosen in this study. PBS cell-plastics were examined for their following mechanical and physical properties: Young's modulus, tensile strength, thermal analysis, and surface hydrophilicity. PBS cell-plastic (1:1) composed of 50% PBS (w/w) exhibited the potential to replace petroleum-derived plastics such as low-density polyethylene and polyvinyl chloride. This study introduces the practical possibility of PBS cell-plastics as green plastics.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Investigation of the Mechanical Strength of Cell-plastics Fabricated Using Unicellular Green Algal Cells and Varying Weight Ratios of Biodegradable Polybutylene Succinate
AU  - Akihito Nakanishi
AU  - Kohei Iritani
AU  - Yuri Sakihama
AU  - Marina Watanabe
Y1  - 2020/11/11
PY  - 2020
N1  - https://doi.org/10.11648/j.ijmb.20200504.11
DO  - 10.11648/j.ijmb.20200504.11
T2  - International Journal of Microbiology and Biotechnology
JF  - International Journal of Microbiology and Biotechnology
JO  - International Journal of Microbiology and Biotechnology
SP  - 159
EP  - 164
PB  - Science Publishing Group
SN  - 2578-9686
UR  - https://doi.org/10.11648/j.ijmb.20200504.11
AB  - Petroleum-derived plastics are currently indispensable; however, they are non-recyclable and exhaustible. Despite global progress in the research and development for biodegradable green plastics using recyclable resources, green plastics are unable to replace petroleum-derived plastics so far because of the costs involved in the extraction and purification processes. Due to the increasing demand for the development of innovative green plastics, cell-plastic composed of the green alga Chlamydomonas reinhardtii as an ingredient and biodegradable compounds as fillers was proposed as a novel green plastic. For a carbon-recycling system in the future, C. reinhardtii is advantageous due to higher growth activity using CO2 gas in atmosphere compared to other terrestrial plants. In addition, the rigidity of its cell wall would prevent the reduction of a mechanical strength of the cell-plastics. Green plastics made of organic polymers are expensive because of high producing cost. On the other hand, the plastics made of green algae, instead of organic polymers, would be expected reducing the price. Thus, the purpose of this study was to clarify whether the cell-plastics produced by substituting organic polymers with algal cells could perform mechanical and physical properties similar to existing plastics products. As a filler for cell-plastics, biodegradable polybutylene succinate (PBS), which form a self-standing film, was chosen in this study. PBS cell-plastics were examined for their following mechanical and physical properties: Young's modulus, tensile strength, thermal analysis, and surface hydrophilicity. PBS cell-plastic (1:1) composed of 50% PBS (w/w) exhibited the potential to replace petroleum-derived plastics such as low-density polyethylene and polyvinyl chloride. This study introduces the practical possibility of PBS cell-plastics as green plastics.
VL  - 5
IS  - 4
ER  -

Copy | Download